Features

　　1,150 W heat exchanger

　　40 ml in 30 seconds peak performance

　　600 m³/min fog output

　　Variable output control for subtle effects

　　7-8 minute warm-up time

　　Digital remote, DMX and RDM

　　Compatible with a wide range of JEM Pro fog fluids

　　Floor standing or truss mounting (bracket included)

　　PowerCON TRUE1

　　2.5-liter bottle

　　Tech Specs

　　PhysicalLength: 485 mm (19.1 in.)Width: 335 mm (13.2 in.)Height: 242 mm (9.6 in.)Height with hanging bracket: 333 mm (13.2 in.)Weight, dry: 11.2 kg (24.7 lbs.)Weight, filled: 13.7 kg (30.2 lbs.)

　　PerformanceCoverage volume: 600 m3 (21,189 ft3) per minuteFluid consumption (max.): 100 ml per minuteContinuous effect outputReady time: 7 minutes

　　Control and ProgrammingControl options: Integrated digital remote control, DMX, optional analog remote control, master/slave link mode, PLC (0-10V)Control parameters: Continuous or timer-controlled outputFog: Variable output control, 0-100%DMX channels: 1External fluid control: Fluid sensingDMX compliance: ANSI E1.11 - USITT DMX512-ARDM compliance: ANSI/ESTA E1.20 RDM

　　ConstructionHousing: Steel and aluminumHanging bracket: Integrated yoke with safety attachment pointColor: BlackHeat exchanger: 1150 W, thermally protectedFluid pump: Oscillating piston, high pressureFluid management: Fluid out sensing, sealed for transportationFluid reservoir: 2.5 l drop-in reservoir with quick-connect fittingExternal fluid control: Fluid sensingRemote control: Integrated digital remote with 3 m cable, 3-pin XLR connector

　　InstallationMounting: Standing or hangingOrientation: Up to +/-40° from horizontalClearance around machine: 100 mm (4 in.)

　　ConnectionsAC power: Neutrik PowerCON TRUE1DMX and link mode in/out: 5-pin locking XLRRemote control: 3-pin locking XLRFirmware: AVR socket

　　ElectricalEU modelAC power: 220-240 V nominal, 50/60 HzMain fuse: 6.3 AT (slow blow), 250 VTypical power and current: 1200 W, 5.3 A*US modelAC power: 100-130 V nominal, 50/60 HzMain fuse: 10 AT (slow blow), 125 VTypical power and current: 1050 W, 8.8 A**Measurements made at nominal voltage. Allow for a deviation of +/- 10%.

　　ThermalMaximum ambient temperature (Ta max.): 40° C (104° F)Exterior surface temperature, steady state: 30° C (86° F)Max. nozzle temperature: 290° C (554° F)Minimum ambient temperature (Ta min.): 5° C (41° F)

　　ApprovalsEU modelEU safety: EN 60 335-1+A15, EN62233EU EMC: EN 61000-6-3EU immunity: EN 61000-6-1Australia/NZ (pending): RCMUS modelUS safety: UL 998Canadian safety: CSA C.22.2 No. 104.01

　　Included ItemsFluid reservoir, 2.5 l: P/N 34300521JEM™ ZR Series Digital Remote Control: P/N 92765048Power input cable, EU, PowerCON TRUE1, stripped ends, 3 m (9.8 ft.): P/N 11501043Power input cable, US, 10 A, PowerCON TRUE1, molded NEMA 5-15P, 3 m (9.8 ft.): P/N 11501044

　　AccessoriesJEM™ ZR25 Ducting System with 5 m (16.4 ft.) ducting: P/N 92625012JEM™ ZR Series PLC Interface: P/N 92765049Power cablesPower input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786Power connectorsCable connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789Approved fluidsJEM™ Pro Smoke StudioJEM™ Pro Smoke SuperJEM™ Pro Smoke High DensityJEM™ I-Fog FluidJEM™ Pro Clean SupremeVarious sizes available - contact your dealer or see 'Fluids' product pages for detailsInstallation hardwareG-clamp: P/N 91602003Half-coupler clamp: P/N 91602005Quick trigger clamp: P/N 91602007Service toolsEpsilon 5 AVR Programmer: P/N 50502004Temperature Calibration Box: P/N 92620005

　　Ordering InformationJEM™ ZR25, EU: P/N 92215320JEM™ ZR25, US: P/N 92215330