Features

　　Choice of premixed LEDs, single color LEDs or variable white version

　　Up to 3,500 lumen at full white (RGBW)

　　Glare shield and anti skid glass options available

　　Five different beam angle options

　　Internal power and control (DMX, RDM)

　　Super rugged IP67 housing

　　0–100% intensity control

　　Tech Specs

　　PhysicalFixtureHeight: 283 mm (11.2 in.)Trim ring outer diameter: 340 mm (13.4 in.)Trim ring thickness: 7 mm (0.3 in.)Housing top flange outer diameter: 310 mm (12.2 in.)Weight: 9.5 kg (44.1 lbs.)Installation SleeveInstallation sleeve height: 350 mm (13.8 in.)Installation sleeve tube external diameter: 334 mm (13.2 in.)

　　Dynamic EffectsAll modelsIntensity: 0 - 100%Exterior Inground 400 and 410Color mixing: RGBWExterior Inground 420Color temperature control: 2700 K - 6500 K

　　Control and ProgrammingAll modelsControl systems: DMX, RDMSetting and addressing: RDMReceiver: RS-485Firmware update: Serial upload via DMX linkDMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20Exterior Inground 400 and 410DMX channels: 3/4Exterior Inground 420DMX channels: 2

　　OpticsAll modelsMinimum LED lifetime: 50 000 hours (to >70% luminous output)**Figure obtained under manufacturer's test conditionsExterior Inground 400Light source: R, G, B and W single-color LEDsBeam angle options: 7°, 14°, 31°, 57°, 7° x 60°Exterior Inground 410Light source: RGBW quad-color LEDBeam angle options: 19°, 22°, 36°, 65°, 20° x 61°Exterior Inground 420Light source: 2700 K and 6500 K LEDsBeam angle options: 7°, 14°, 31°, 57°, 7° x 60°

　　Photometric DataExterior Inground 400Total luminous output: TBAExterior Inground 410Total luminous output: 3500 lumensExterior Inground 420Total luminous output: TBA

　　ConstructionHousing: AluminumFinish: Black anodizedTrim ring: Stainless steelInstallation method: In installation sleeveColor: BlackProtection rating: IP67RoHS compliantWeight resistance (in installation sleeve with stable groundwork): 4000 kg (from vehicle tire for example)

　　InstallationInstallation method: Installation sleeve (ordered separately)Minimum distance to illuminated surfaces: 0.2 m (0.6 ft.)

　　ConnectionsPower connection: 1.8 m (5.9 ft.) cable tail without connectorData connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tailAll cable entries: IP68 cable gland

　　ElectricalAC power: 100-277 V~ nominal, 50/60 HzPower supply unit: Integrated, auto-sensing multi-voltagePower consumption, steady state, all LEDs at zero intensity:TBA

　　Typical Power and Current120 V, 60 Hz: 1.3 A, 142 W, PF 0.99230 V, 50 Hz: 0.7 A, 142 W, PF 0.97Measurements made at nominal voltage. Allow for a deviation of +/- 10 %

　　ThermalCooling: Conduction / convectionMaximum ambient temperature (Ta max.): 45° C (113° F)Minimum ambient temperature (Ta min.): -30° C (-4° F), power must be maintained below 0° C (32° F)Maximum surface temperature, steady state, at 40° C ambient: 90° C (194° F)Total heat dissipation (calculated, +/- 10%): 490 BTU/hr.

　　ApprovalsEU safety: EN60598-2-5 (EN60598-1), EN60598-2-13, EN62471, EN62493EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5US safety (pending): ANSI/UL 1598US EMC: 47 CFR Part 15 Class ACanadian safety (pending): CSA C.22.2 No. 250Australia/NZ (pending): RCM

　　AccessoriesInstallation sleeve: P/N TBATrim ring, flush mount installation: P/N TBATrim ring, beveled installation: P/N TBANarrow beam diffuser kit: P/N TBAMedium beam diffuser kit: P/N TBAWide beam diffuser kit: P/N TBAVery wide diffuser kit: P/N TBAAsymmetrical diffuser kit: P/N TBADirectional diffuser kit: P/N TBAAnti-glare shield (internally mounted): P/N TBAAnti-skid front glass: P/N TBA

　　Ordering InformationInground 400, bevelled, EU: P/N 90507105Inground 400, bevelled, US: P/N 90507135Inground 410, bevelled, EU: P/N 90507110Inground 410, bevelled, US: P/N 90507140Inground 420, bevelled, EU: P/N 90507115Inground 420, bevelled, US: P/N 90507145