Close

Product

Model:Exterior Projection 500 MG

2016-12-15 02:28:42


The Exterior™ Projection 500 is a powerful fixture for integrating textures, patterns and graphics in outdoor lighting designs. The fixture can be used for bright and dynamic logo projection as well as precision framing.

Using advanced LED technology, it stands out for its energy efficiency, compact size and unlimited creative opportunities.

 

  • Very powerful 230 Watt / 6500 Lumen LED image projection 
  • Fully weatherized for trouble free/minimal maintenance use in permanent outdoor installations
  • Feature packed which allows for a lot of creativity in terms of lighting effects

  Features

  Outstandingly bright 6500 lumens output with 4 beam angles from narrow to wide

  Powerful close-range and long-range projection

  Flat-field, high-contrast image projection based on high-power LED engine

  4 layers of versatile dynamic effects (colors, gobo projection, gobo animation, prisms/frost)

  Crisp image projection

  Rugged IP66-rated housing

  Minimal maintenance – low total cost of ownership

  Tech Specs

  PhysicalLength: 415 mm (16.4 in.)Width: 293 mm (11.6 in.)Height: 444 mm (17.5 in.)Weight: 15 kg (33.1 lbs.)All figures include mounting yoke

  Dynamic EffectsColor wheel: 8 interchangeable colors + openGobo wheel: 6 rotating gobos plus open, indexing, variable rotationGobo animation: Variable speed linear animation effectPrism: Prism wheel with 2 interchangeable prisms, prism rotation and indexingFrost (wash effect): Motorized variableFocus: Motorized, variable 3 m (9.8 ft.) to infinityShutter: Strobe and pulse effects, instant open and blackoutDimming: Electronic, constantly variable 0-100%, 16-bit control

  Control and ProgrammingControl options: DMX, RDM, standaloneDMX channels: 13Configuration, adressing and status: Onboard control panel with OLED displayControl resolution: 8-bit DMX control of each colorDMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20

  OpticsLight source: 230 W white light LED engineCRI (Color Rendering Index): 72Color temperature, EU models: TBAColor temperature, US models: TBALED lifetime: 50 000 hours (to >70% luminous output)**Figure obtained under manufacturer's test conditions

  Photometric DataCut-off angle: 10°, 20°, 35° or 46° (depending on model ordered)Luminous output: Up to 6500 lumens

  ConstructionHousing: Cast aluminumFinish: Hard anodized, metallic grey lacqueredFront glass: 5 mm (0.2 in.) anti-reflection coated tempered glassIngress protection: IP66Impact resistance: IK08 (with control panel display cover plate installed)EPA (Effective Projected Area): 0.15 m2RoHS compliant

  GobosSuitable material: Borosilicate glass, coatings heat-resistant to 450°C (842° F)Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)Maximum image diameter: 23 mm (0.91 in.)Gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)Gobo thickness, maximum: 3.0 mm ±0.3 mm (0.12in. ± 0.012 in.)

  InstallationOrientation: Any (sides must be kept vertical)Mounting: Adjustable yokeMinimum distance to illuminated surfaces: 0.5 m (20 in.)Location: Suitable for wet locations. Do not immerse in water.

  ConnectionsPower cable entry: IP68 cable glandPower connection: 1.8 m (5.9 ft.) cable tail with bare endsData cable entry: IP68 cable glandData connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends

  ElectricalAC power: 100-240/277 V nominal, 50/60 HzPower supply: Auto-ranging electronic switch-modeTypical half-cycle RMS inrush current: 8.4 AIdle power (zero intensity, no effects applied): 32 W, 0.3 A

  Typical Power and Current110 V, 60 Hz: 320 W, 2.9 A, PF 0.977230 V, 50 Hz: 310 W, 1.4 A, PF 0.971277 V, 60 Hz: 305 W, 1.2 A, PF 0.950Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

  ThermalCooling: Convection, internal forced airMaximum ambient temperature (Ta max.): 45° C (113° F) *Minimum ambient temperature (Ta min.): -30° C (-22° F)***Above this temperature, the fixture regulates output to protect from overheating.**Power must remain applied at ambient temperatures below 0° C (32° F).

  ApprovalsEU safety: EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547US safety: ANSI/UL 1598US EMC: CRF 47 Part 15 Class ACanadian safety: CSA C22.2 No 250.0Australia/NZ: RCM

 

  Related ItemsMartin™ RDM 5.5 Splitter: P/N 90758150

  Ordering InformationEU modelsExterior Projection 500 MG, Narrow, EU: P/N 90506500Exterior Projection 500 MG, Medium, EU: P/N 90506505Exterior Projection 500 MG, Wide, EU: P/N 90506510Exterior Projection 500 MG, Very Wide, EU: P/N 90506535US modelsExterior Projection 500 MG, Narrow, US: P/N 90506515Exterior Projection 500 MG, Medium, US: P/N 90506520Exterior Projection 500 MG, Wide, US: P/N 90506525Exterior Projection 500 MG, Very Wide, US: P/N 90506530

Go Back