Features

　　Four high power pre-mixed LEDs: no color separation or shadows

　　Broad color palette (RGBW)

　　Color calibration ensuring uniform colors across fixtures

　　White light options: Cold, Neutral and Warm White

　　Extremely rugged outdoor / underwater design (IP68)

　　Discreet low voltage cabling

　　Choice of narrow or medium beam angles

　　DMX control

　　Tech Specs

　　PhysicalExterior 100 LuminaireLength: 165 mm (6.5 in.) including cable gland and cable exitWidth: 128 mm (5.1 in.) including mounting/tilt adjustment fasteners and side-routed cableHeight: 166 mm (6.6 in.) including mounting bracketWeight: 1.4 kg (3.1 lbs.) including mounting bracketSplitterLength: 133 mm (5.3 in.) including cable glandsWidth: 80 mm (3.2 in.)Height: 59 mm (2.4 in.)Weight: 230 g (0.6 lbs.)Power Supply Unit, EU modelLength: 355 mm (14.0 in.)Width: 146 mm (5.8 in.) including cable glandsHeight: 83 mm (3.3 in.)Weight: 2.8 kg (6.2 lbs.)Power Supply Unit, US modelLength: 355 mm (14.0 in.)Width: 186 mm (7.4 in.) including cable glandsHeight: 90 mm (3.6 in.)Weight: 3.4 kg (7.5 lbs.)

　　Dynamic EffectsColor mixing: RGBW (RGBW models)Intensity: 0 - 100% (all models)

　　Control and ProgrammingControl options: DMX, programmable default sceneColor control modes: RGB, RGBW (RGBW models)Control modes: Calibrated and raw (all models)DMX channels: 1 (CW, NW and WW models), 3/4 (RGBW models)Setting and addressing: IR remote control unit, RDM-compliant controllerDimming resolution: 14-bit (internal)DMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20Receiver: RS-485Firmware update: Serial upload via DMX link

　　OpticsLight source: Cree MC-E high-power emittersColor temperature (CW model): 6500 KColor temperature (NW model): 4000 KColor temperature (WW model): 2700 KMinimum LED lifetime: 50 000 hours (to >70% luminous output)**Figure obtained under manufacturer´s test conditions

　　ConstructionColor: Steel grey (custom colors available upon request)Housing: Aluminum with micro-arc oxidation coating, stainless steel protection frameMounting bracket: 1.5 mm (0.1 in.) stainless steelFront glass: Polycarbonate with UV and mechanical protection coatingProtection rating: Luminaire IP68, Splitter IP65 (IP68 with sealing compound), PSU IPX7

　　InstallationOrientation: AnyVertical aiming: 330°Minimum distance to illuminated surfaces: 0.1 m (4.0 in.)Mounting: Surface mount, 35 mm (1.4 in.) DIN rail, mounting post, ground stake

　　ConnectionsAll cable entries: IP68 cable glandInternal, power and data: Quick connector terminals

　　ElectricalPower supply unit: External PSU in IPX7-rated housingAC power (input to EU model PSU): 100-240 V nominal, 50/60 HzAC power (input to US model PSU): 100-240 V nominal, 60 HzSystem power (output from PSU): 20 - 40 VDC (36 VDC nominal)Power consumption, steady state, all LEDs at zero intensity:0.42 W per luminaire

　　Typical Power and CurrentCalibrated RGB mode, RGBW Luminaire: 12 W, 0.4 A at 30 VDCUncalibrated RGBW mode, RGBW Luminaire: 18 W, 0.6 A at 30 VDCCalibrated mode, white (CW, NW or WW) Luminaire: 17 W, 0.6 A at 30 VDCUncalibrated mode, white (CW, NW or WW) Luminaire: 18 W, 0.6 A at 30 VDCMeasurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

　　ThermalCooling: ConvectionMaximum ambient temperature (Ta max.): 45° C (113° F)Minimum ambient temperature (Ta min.): -40° C (-40° F), power must be maintained below 0° C (32° F)

　　ApprovalsEU safety: EN 60598-2-5 (EN 60598-1)EU EMC: EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3US safety: UL 1598, UL 8750US Safety approvals apply to the entire system using the US model PSU

　　Included ItemsIncluded with luminaire3 m (9 ft. 11 in.) luminaire cable (pre-installed)Adjustable mounting bracketIncluded with SplitterBlanking plug for sealing unused luminaire cable glandBlanking plug for sealing unused hybrid cable glandDMX line terminatorsIncluded with PSUBlanking plug for sealing unused data cable glandTwo blanking plugs for sealing unused mains power or hybrid cable glandsDMX line terminatorsSafety and installation guide

　　AccessoriesExterior 50 and 100 infrared remote control: P/N 90510210Exterior 100 light shield, narrow, set of five: P/N 90510240Exterior 100 light shield, medium, set of five: P/N 90510250Exterior 100 light shield, wide, set of five: P/N 90510260Exterior 50 and 100 standard mounting post, 270 mm (10.7 in.): P/N 90510310Exterior 50 and 100 telescopic mounting post, 160-290 mm (6.3-11.5 in.): P/N 90510300Exterior 50 and 100 ground stake: P/N 90510320IP68 Sealing Compound Set (for use with Splitters): P/N 90510220Gel-sealed cable connection box for extending luminaire cable:P/N 90510230Exterior 50 and 100 luminaire cable extn., 10 m (32 ft. 10 in.), gel-sealed conn. box: P/N 90510200Exterior 50 and 100 splitter link hybrid cable, 25 m (82 ft. 1 in.): P/N 90510170Exterior 50 and 100 splitter link hybrid cable, 50 m (164 ft. 1 in.): P/N 90510180Exterior 50 and 100 splitter link hybrid cable, 100 m (328 ft. 1 in.): P/N 90510190Hybrid cables carry both power and data

　　Related ItemsMartin M-PC V3™ Pro (up to 64 DMX universes) incl. Martin USB Duo™: P/N 90732010Martin M-PC V3™ Basic (up to 8 DMX universes) incl. Martin USB Duo™: P/N 90732070Martin USB Duo™ USB/DMX Interface Box: P/N 90703010

　　Spare Parts3.15 AT (slow-blow) primary fuse for EU model PSU: P/N 05020013