Model:Exterior Wash 200
2016-12-14 09:35:28
Exterior™ Wash 200 is a powerful, compact and energy-efficient LED lighting fixture designed to illuminate mid-sized structures and building facades. A discreet, optional snoot integrates seamlessly with the slick design of the fixtures. It has built-in display for ease-of-use, a wide selection of beam angles and is fully IP-rated for permanent outdoor use.
The Exterior Wash 200 is designed for narrow beam applications and is based on separate LEDs for red, green, blue and white
- Narrow beam configuration with 6 beam angle options
- Functional and discreet optional snoot which integrates with the design of the fixtures
- Control via DMX, RDM and OLED display
Features
Powerful single color R,G,B,W LEDs
Up to 6650 lumens at full white (RGBW)
Six different beam angle options
Internal power and control (DMX, RDM and OLED display)
Rugged IP66 housing
0–100% intensity control
Tech Specs
PhysicalLength: 270 mm (10.7 in.)Width: 334 mm (13.2 in.)Height: 382 mm (15.1 in.)Weight: 13.0 kg (28.7 lbs.)
Dynamic EffectsIntensity: 0 - 100%Color mixing: RGBW
Control and ProgrammingControl systems: DMX, RDMDMX channels: 4Setting, addressing, standalone programming: Control panel with OLED displayReceiver: RS-485Firmware update: Serial upload via DMX linkDMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20
OpticsMinimum LED lifetime: 50 000 hours (to >70% luminous output)*Light source: R, G, B and W single-color LEDsBeam angle options: 7°, 12°, 21°, 40°, 60°, 12° x 60°*Figure obtained under manufacturer's test conditions
Photometric DataTotal luminous output: TBA
ConstructionProtection rating: IP66Color: Light grey RAL 7035 Gloss 5, White RAL 9010 Gloss 7Housing: Cast aluminumEffective Projected Area (EPA): 0.1 m² including snootImpact resistance: IK08 (with control panel display cover plate installed)Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)RoHS compliant
InstallationOrientation: AnyMounting: Adjustable yokeVertical aiming: TBAMinimum distance to illuminated surfaces: 0.2 m (0.6 ft.)
ConnectionsPower connection: 1.8 m (5.9 ft.) cable tail without connectorData connection: 1.8 m (5.9 ft.) open ended 5-conductor combined input + output cable tailAll cable entries: IP68 cable gland
ElectricalAC power: 100 - 240 / 277 V nominal, 50/60 HzPower supply unit: Integrated, auto-sensing multi-voltagePower consumption, steady state, all LEDs at zero intensity: 3 W
Typical Power and Current120 V, 60 Hz: 1.4 A, 170 W, PF 0.99230 V, 50 Hz: 0.8 A, 170 W, PF 0.95Measurements made at nominal voltage. Allow for a deviation of +/- 10%
ThermalCooling: ConvectionMaximum ambient temperature (Ta max.): 45° C (113° F)Minimum ambient temperature (Ta min.): -30° C (-22° F), power must be maintained below 0° C (32° F)Maximum surface temperature, steady state, at 40° C ambient: 55° C (131° F)Total heat dissipation (calculated, +/- 10%): 485 BTU/hr
ApprovalsEU safety: EN60598-2-5 (EN60598-1), EN62471, EN62493, EN60598-2-1EU EMC: EN55015, EN61547, EN61000-3-2, EN6100-3-3, EN61000-4-2, EN6100-4-4, EN6100-4-5US safety: ANSI/UL 1598US EMC: 47 CFR Part 15 Class ACanadian safety: CSA C.22.2 No. 250Australia/NZ: RCM
Included ItemsPower cable: Cable tail, 1.8 m (5.9 ft.), external diameter 9.5 mm (0.38 in.), installedData cable: Cable tail, 1.8 m (5.9 ft.), external diameter 6.5 mm (0.26 in.), installed
AccessoriesOpticalExterior Wash 200 Series, narrow diffuser kit: P/N 91610154Exterior Wash 200 Series, medium diffuser kit: P/N 91610153Exterior Wash 200 Series, wide diffuser kit: P/N 91610152Exterior Wash 200 Series, very wide diffuser kit: P/N 91610151Exterior Wash 200 Series, asymmetric diffuser kit: P/N 91610150Exterior Wash 200 Series, glare shield / snoot: P/N 91611745
Related ItemsMartin USB interface box incl. cables: P/N 90758090M-PC 2U™ incl. Martin M-DMX Interface Box and USB cable: P/N 90737070
Ordering InformationExterior Wash 200, 7°, EU, aluminum: P/N 90509087Exterior Wash 200, 7°, US, aluminum: P/N 90509090
Go Back