Features

　　Bright LED PAR Can

　　12x10 W RGBW LEDs

　　Single-lens wash with fully premixed color

　　10° to 60° zoom

　　Electronic dimming and strobe

　　Temperature-controlled fan cooling

　　Flexible bracket – floor or truss-mounted

　　5-pin XLR

　　Tech Specs

　　PhysicalLength: 266 mm (10.5 in.)Width: 287 mm (11.3 in.)Height: 329 mm (13.0 in.)Weight: 5.5 kg (12.2 lbs.)

　　Dynamic EffectsColor mixing: RGBWColor selection: 33 color presets plus full white, 'color wheel' effectsElectronic dimming: 0 - 100%Strobe and pulse effects: Variable speed and action, random strobeElectronic 'shutter' effect: Instant open and blackoutZoom: Motorized

　　Control and ProgrammingControl options: DMX, stand-alone sceneDMX channels: 5/9White balance control: RGB adjustmentDMX address setting: Control panel with LCD displayStand-alone programming: Control panel with LCD displayProtocol: USITT DMX512/1990

　　OpticsLight source: 12 x 10 W RGBW Osram Ostar LEDsZoom range: 10° - 60°Minimum LED lifetime: 50 000 hours (to >70% luminous output)**Figure obtained under manufacturer's test conditions

　　ConstructionHousing: AluminumColor(s): BlackProtection rating: IP20

　　InstallationMounting: Adjustable bracket, surface or truss mountOrientation: AnyLocation: Indoor use only

　　ConnectionsAC power in/thru: Neutrik PowerConDMX data in/thru: 5-pin XLR

　　ElectricalAC power: 100-240 V nominal, 50/60 HzTypical total power consumption: 151 WPower consumption figures are typical, not maximum. Allow for +/-10% variation.

　　Typical Power and Current120 V, 60 Hz: 1.3 A, 151 W, PF 0.993230 V, 50 Hz: 0.7 A, 148 W, PF 0.961Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

　　ThermalCooling: Forced air (temperature-regulated, low noise)Maximum ambient temperature (Ta max.): 40° CMinimum ambient temperature (Ta min.): 0° CTotal heat dissipation (calculated, +/- 10%, at full intensity, full white): 520 BTU/hr.

　　ApprovalsEU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493EU EMC: EN 55015, EN 55103-1, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61547US safety (pending): UL 1573US EMC: 47 CFR Part 15 Class ACanadian safety (pending): CSA C22.2 No. 166Canadian EMC: ICES-003 Class AAustralia/NZ: C-TICK N4241

　　Included ItemsPower cable 1.5 mMounting bracket

　　AccessoriesGel Frame for RUSH PAR 2 (set of 10): P/N 46000106Cables, 16 A, for connection to power in chainsPower input cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3 m (9.9 ft.): P/N 11541508Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 1.4 m (4.6 ft.): P/N 11541509Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 2.25 m (7.4 ft.): P/N 11541510Power relay cable, 14 AWG, UL, SJT, 1.5 mm2, H05VV-F, with PowerCon input connector, 3.25 m (10.7 ft.): P/N 11541511Power connectorsNeutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805DMX linkDMX termination plug, 3-pin male XLR: P/N 91613017Installation hardwareG-clamp: P/N 91602003Half-coupler clamp: P/N 91602005

　　Related ItemsRUSH Software Uploader 1™: P/N 91611399

　　Ordering Information