Close

Product

Model:RUSH MH 8 Mini Profile

2016-12-14 07:31:04


The RUSH MH 8 Mini Profile is Martin Professional’s smallest moving head to date with super sharp optics and an impressive output that punches above its class. High speed pan and tilt with separate color and gobo wheels allow designers maximum flexibility from the lounge bar to the high-energy dance floor, and all within an affordable price bracket.

The MH 8 Mini Profile uses the latest 18 W white LED technology that delivers super sharp optics with over 800 lumens via a 14° beam angle. Eight varied gobos and eight vibrant colors are available, with electronic strobe/dimming, manual focus and high-speed pan and tilt. The eye-catching effects can be controlled via DMX or synchronized to a music beat via audio trig. The compact fixture weighs only 4.5 kg.

 

  • Super sharp optics
  • High output 18 W white LED
  • Separate color and gobo wheels 

　　Features

　　Super sharp optics

　　Crisp, flat gobo projection (class-leading in product category)

　　Compact size and low weight

　　Latest generation 18 W LED with over 800 lumens (class-leading in product category)

　　Separate color and gobo wheels

　　Gives maximum flexibility to designers

　　Tech Specs

　　PhysicalLength: 157 mm (6.1 in.)Width: 237 mm (9.3 in.)Height: 327 mm (12.9 in.)Weight: 4.5 kg (9.9 lbs.)

　　Dynamic EffectsColor wheel: 8 colors plus open, variable and random rotationGobo wheel: 8 static gobos plus open, variable and random rotationStrobe: Variable from 3 - 20 Hz, pulse effects and random strobeElectronic dimming: 0 - 100%, four dimming curve optionsPan: 540°Tilt: 230°

　　Control and ProgrammingControl options: DMX, 4 stand-alone shows, master/slaveDMX channels: 10Stand-alone trigger: Auto, musicDMX compliance: USITT DMX512/1990Interface: Control panel with backlit LCD display

　　OpticsLight source: 18 W OSRAM LE UW Q8WP LEDMinimum LED lifetime: 50 000 hours (to >70% luminous output)*Beam angle: 14°Focus: Manual*Figure obtained under manufacturer's test conditions

　　ConstructionColor: BlackHousing: High-impact flame-retardant thermoplasticIP rating: IP 20

　　InstallationMounting points: Bracket for rigging clampLocation: Dry location only, must be fastened to surface or structureOrientation: Vertical (head down if suspended)Minimum distance to illuminated surfaces: 200 mm (8 in.)Minimum distance to combustible materials: 100 mm (4 in.)Minimum clearance around fans and vents: 100 mm (4 in.)

　　ConnectionsAC power input: IECDMX data in/out: 3-pin and 5-pin locking XLR

　　ElectricalAC power: 100-240 V nominal, 50/60 HzPower supply unit: Auto-ranging electronic switch modeFuse: T 2.0 A

　　Typical Power and Current120 V, 60 Hz: 52 W, 0.8 A230 V, 50 Hz: 50 W, 0.5 ATypical half-cycle RMS inrush current: 6.4 AMeasurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

　　ThermalCooling: Forced air (temperature-regulated, low noise)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 0° C (32° F)Total heat dissipation (calculated, +/- 10%, at full intensity, full white): 180 BTU/hr.

　　ApprovalsEU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-4-2, EN 61547US safety: UL 1573US EMC: CFR Title 47 Part 15 Class ACanadian safety: CSA C22.2 No. 166Canadian EMC: ICES-003 Class AAustralia/NZ (pending): RCM

　　Included ItemsPower cable, 1.9 m (6.3 ft.) without mains plugPower cable, 1.9 m (6.3 ft.) with US plugBracket for rigging clamp attachment

　　AccessoriesInstallation hardwareG-clamp: P/N 91602003Half-coupler clamp: P/N 91602005Quick-trigger clamp: P/N 91602007Safety cable, safe working load, 50 kg (110 lbs.): P/N 91604003

　　Related ItemsRUSH™ Software Uploader 1: P/N 91611399

　　Ordering InformationRUSH™ MH 8 Mini Profile in cardboard box: P/N 90280110

Go Back