Features

　　Single-lens wash with fully premixed color

　　Broad color palette, RGBW color mixing

　　Eye-candy Aura Effects™

　　Uniform shades

　　Built-in FX engine

　　11 to 58° zoom

　　3850 Lumens output

　　Rapid movement

　　Compact, low weight design (5.6 kg)

　　High efficiency, low power consumption, long lifetime

　　Tech Specs

　　PhysicalLength: 302 mm (11.9 in.) across yokeWidth: 302 mm (11.9 in.) across yokeHeight: 360 mm (14.2 in.), head straight upWeight: 5.6 kg (12.4 lbs.) without accessories

　　Dynamic EffectsBeam color mixing: RGBWAura (secondary lens array illumination) color mixing: RGBBeam color temperature control: CTO, variable 10 000 - 2500 KBeam and aura electronic 'color wheel' effect: 33 LEE-referenced colors plus white, variable-speed color-wheel rotation effect and random colorBeam and aura independent shutter effects: Electronic, with regular and random pulse, burst and strobe effectsPre-programmed effects: Range of synchronized and independent beam and aura FX, different FX can be combinedElectronic dimming: Independent beam and aura, four dimming curve optionsPan: 540°Tilt: 232°Pan and tilt speed: Adjustable via onboard control panel and DMX

　　Control and ProgrammingControl options: Independent control of beam (primary output) and aura (secondary lens array illumination)Macro programs selectable via DMX: Synchronized beam and aura effectsControl: DMXRDM: ImplementedControl resolution: 8-bit, with 16-bit control of pan & tiltDMX channels: 14/25Setting and addressing: Control panel with backlit graphic displayDMX compliance: USITT DMX512-ARDM compliance: ANSI/ESTA E1.20Transceiver: RS-485Fixture software update: Via DMX with Martin™ USB Duo DMX Interface Box

　　OpticsZoom range: 11° - 58°One-tenth peak angleLight source: 19x 10W RGBW LED Array SystemLED refresh rate: Beam 1220 Hz, Aura 4395 HzMinimum LED lifetime: 50 000 hours (to >70% luminous output)**Figure obtained under manufacturer´s test conditions

　　Photometric DataTotal output: 3850 lumens (zoom at maximum)

　　ConstructionColor: BlackHousing: High-impact flame-retardant thermoplasticProtection rating: IP20

　　InstallationMounting points: One M12 threaded hole for rigging clampLocation: Indoor use only, must be fastened to surface or structureOrientation: AnyMinimum distance to combustible materials: 100 mm (4.0 in.)Minimum distance to illuminated surfaces: 200 mm (7.9 in.)

　　ConnectionsAC power input: Neutrik PowerConAC power throughput: Neutrik PowerConDMX and RDM data in/out: 5-pin locking XLR

　　ElectricalAC power: 100-240 V nominal, 50/60 HzMaximum total power consumption: 260 WPower supply unit: Auto-ranging electronic switch modeMain fuse: 5 AT (slow blow)Typical power consumption, all effects static, zero light output:<15 W

　　Typical Power and Current100 V, 60 Hz: 236 W, 2.4 A, PF 0.994120 V, 60 Hz: 234 W, 2.0 A, PF 0.992208 V, 60 Hz: 229 W, 1.2 A, PF 0.970230 V, 50 Hz: 228 W, 1.1 A, PF 0.959240 V, 50 Hz: 228 W, 1.0 A, PF 0.953Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

　　ThermalCooling: Forced air (temperature-regulated, low noise, user-definable levels)Maximum ambient temperature (Ta max.): 40° C (104° F)Minimum ambient temperature (Ta min.): 5° C (41° F)Total heat dissipation (calculated, +/- 10%): 880 BTU/hr.

　　ApprovalsEU safety: EN 60598-2-17 (EN 60598-1), EN 62471EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547US safety: UL 1573US EMC: FCC Part 15 Class ACanadian safety: CSA E598-2-17 (CSA E60598-1)Canadian EMC: ICES-003 Class AAustralia/NZ: C-TICK N4241

　　Included ItemsM12 bolt suitable for use with Martin rigging clampsUser manual: P/N 35000254

　　Accessories3 m power cable, 12 AWG, SJT, with PowerCon NAC3FCA power input connector: P/N 11541503Neutrik PowerCon NAC3FCA power input connector, cable mount, blue: P/N 05342804Neutrik PowerCon NAC3FCB power output connector, cable mount, light grey: P/N 05342805Power relay cable with PowerCon connectors, 1.4 m (4.6 ft.):P/N 11850099Power relay cable with PowerCon connectors, 2.25 m (7.4 ft.):P/N 11850100Set of 5 quick-mount surface mounting brackets: P/N 91606017G-clamp: P/N 91602003Quick trigger clamp: P/N 916020076-unit flightcase for MAC Aura: P/N 91515020Half-coupler (tube) clamp: P/N 91602005Optical AccessoriesMAC Aura / Aura XB Soft Lens Kit: P/N 91611730

　　Related ItemsMartin USB Duo™ DMX Interface Box: P/N 90703010Martin RDM 5.5 Splitter™: P/N 90758150

　　Ordering InformationMAC Aura™ in cardboard box: P/N 90232000MAC Aura­­™ in 6-unit flightcase: P/N 90232010MAC Aura™, white finish, in cardboard box**Available by special order - please contact your Martin™ supplier for details