DAVSE 41500D
2025-02-14 08:44:57
4.3-inch touch screen; support key and touch screen double backup debugging function; support GPIO, TCP, UDP, USB, RS232, RS485 control; support each channel temperature, power, voltage, current monitoring; support 4 into 4 out DSP processor; signal source support analog signal input, sine wave signal input, pink noise input, white noise input, Dante Digital audio signal input, AES digital audio signal input; support DANTE analog automatic backup
Input sensitivity: 0dB, 6dB, 12dB selectable; Input gain: -60-+15dB selectable; Input channel support phase selectable; Input channel support mute function; Input channel support noise gate adjustable; Input channel support 31-band PEQ adjustable, support BYPASS, support high and low-pass filters, support copy and paste reset function. Input channel support delay adjustable; input and output channel support routing optional, can be any channel input, multi-channel output. The input channel can be sent to 2 FIR filter outputs. The output channel can be sent to 2 FIR filter inputs. The output channel supports 10-band PEQ adjustable, BYPASS, high and low pass filters, copy and paste reset function. The output channel supports adjustable delay; the output channel supports adjustable compressor; the output channel supports adjustable limiter; output gain: -60-+15dB selectable; supports 80 scene saving modes; supports Chinese Simplified, Chinese Traditional, English three languages.
Dante Parameters
Support network audio transmission, in the Gigabit network switching system at the same time to transmit 1024 bidirectional channels, the minimum transmission delay of 83.3us, the protocol supports 48KHz and 96KHz two kinds of audio sampling rate, the protocol sampling rate of the highest support 192KHz; digital network audio card configured as a dual-standard network interface to fully support a variety of long-distance transmission of network audio applications, and has a network cascade Exchange and hot backup function.
8Ω stereo power: 4 * 800W
4Ω stereo power: 4*1200W
Bridge single channel: 2*1600W
Constant voltage output: 4X800W
Input connector: XLR female
Input impedance: 20KΩ balanced
Input common state rejection ratio: >80dB
Output Connector: Speakon Block
Signal-to-noise ratio: >102dB
Damping factor: > 1000 @ 8Ω
Total Harmonic Distortion: <0.1% (20 Hz-20 kHz 1W)
Frequency Response: 20Hz-20KHz(+0/-0.3dB,1W/8Ω)
Cooling mode: stepless speed fan, airflow from front to back
Amplifier protection mode: short circuit, disconnection, DC voltage, overheating, overvoltage, RF, ultra-low frequency protection
Power supply specifications: AC voltage 180-240V 50-60Hz
Chassis size (H*W*L): 88mmX440mmX370mm
Go Back