Model: CEN-CI3-3
2016-12-12 06:36:34
The Crestron® CEN-CI3-3 is a single-space rack-mountable device designed to provide a versatile control interface and expansion solution using up to three 3-Series® Control Cards. It is used to expand the control ports of a 3-Series Control System®, and can be installed with the control system at the central equipment cabinet, or located remotely near the device(s) under control. It can be placed on a shelf or rack-mounted using the rack ears included. It interfaces with the control system via Ethernet.
The CEN-CI3-3 accepts three 3-Series control cards (sold separately). Control cards are available to support bidirectional RS-232, 422, or 485; IR or 1-way serial; 0-10V analog inputs; digital logic inputs or outputs; and low-voltage relay outputs.[1]
| Communications | ||
| Ethernet | 10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP | |
| USB | For computer console | |
| Connectors & Card Slots | ||
| S1 – S3 | (3) 3-Series® control card expansion slots | |
| CONTROL SUBNET IN |
(1) 8-wire RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port |
|
| CONTROL SUBNET OUT |
(1) 8-wire RJ45 jack; 10Base-T/100Base-TX/1000Base-T Ethernet port |
|
| 24VDC 2A MAX |
(1) 2.1 x 5.5 mm DC power connector; 24 Volt DC power input; PW-2420RU power pack included |
|
| G | (1) 6-32 screw, chassis ground lug | |
| COMPUTER (front) |
(1) USB Type B female; USB 2.0 computer console port (6 ft cable included); For setup only |
|
| Controls & Indicators | ||
| PWR | (1) Green LED, indicates operating power supplied from power pack | |
| MSG | (1) Red LED, indicates unit has generated an error message | |
| RESET | (1) Recessed pushbutton for hardware reset | |
| SETUP | (1) Recessed pushbutton with red LED for Ethernet auto-discovery | |
| SLOT 1 – 3 | (3) Green LEDs, indicate control cards are inserted in the corresponding slots | |
| CONTROL SUBNET IN (rear) | (2) Bi-color green/amber LEDs, left LED indicates Ethernet connection speed, right LED indicates Ethernet activity | |
| CONTROL SUBNET OUT (rear) | (2) Bi-color green/amber LEDs, left LED indicates Ethernet connection speed, right LED indicates Ethernet activity | |
| Power Requirements | ||
| Power Pack |
2.0 Amps @ 24 Volts DC; 100-240 Volts AC, 50/60 Hz power pack, model PW-2420RU included |
|
| Environmental | ||
| Temperature | 41° to 113° F (5° to 45° C) | |
| Humidity | 10% to 90% RH (non-condensing) | |
| Heat Dissipation | 6 BTU/Hr without cards [1] | |
| Enclosure | ||
| Chassis | Metal, black finish, vented yop and sides | |
| Front Panel | Metal, black finish, polycarbonate label overlay | |
| Mounting | Freestanding or 1RU 19-inch rack-mountable (adhesive feet and rack ears included) | |
| Dimensions | ||
| Height | 1.70 in (44 mm) without feet | |
| Width |
17.28 in (439 mm); 19.00 in (483 mm) with rack ears |
|
| Depth | 10.06 in (256 mm) | |
| Weight | ||
| 5.0 lb (2.3 kg) without cards | ||
Go Back