Close

Product

Model:C3IO-16

2016-12-12 06:15:28




OVERVIEW

The C3IO-16 is a 3-Series™ control card that provides sixteen Crestron® Versiport I/O ports. Each I/O port can function as a 0-10V analog input, a digital logic sensing input, or a digital logic output. The card is designed to install in a control card expansion slot of a 3-Series Control System® model PRO3 or AV3[1], or 3-Series Card Interface model CEN-CI3-1 or CEN-CI3-3.

Notes:

  1. AV3 requires CAGE3 Control Card Expansion Cage accessory to enable use of 3-Series control cards.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

Crestron, the Crestron logo, 3-Series, and 3-Series Control System are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2013 Crestron Electronics, Inc.
 

SPECIFICATIONS

Connectors
  I/O A1 – A8, B1 – B8 (2) 9-pin 3.5mm detachable terminal blocks comprising (16) “Versiport” digital input/output or analog input ports (referenced to GND);
Digital Input: Rated for 0-24 Volts DC, input impedance 20k Ohms, logic threshold >3.125V low/0 and <1.875V high/1;
Digital Output: 250mA sink from maximum 24 Volts DC, catch diodes for use with “real world” loads;
Analog Input: Rated for 0-10 Volts DC, protected to 24 Volts DC maximum, input impedance 21k Ohms with pull-up resistor disabled;
Programmable 5 Volts, 2k Ohms pull-up resistor per pin
Environmental
  Temperature 41° to 113°F (5° to 45°C)
  Humidity 10% to 90% RH (non-condensing)
  Heat Dissipation 8 BTU/Hr
Construction
  Occupies one control card expansion slot of a 3-Series Control System® or 3-Series™ Card Interface
Weight
  4.0 oz (114 g)

Notes:

  1. AV3 requires CAGE3 Control Card Expansion Cage accessory to enable use of 3-Series control cards.

This product may be purchased from an authorized Crestron dealer. To find a dealer, please contact the Crestron sales representative for your area. A list of sales representatives is available online at www.crestron.com/salesreps or by calling 800-237-2041.

 

The specific patents that cover Crestron products are listed online at: patents.crestron.com.

 

Crestron, the Crestron logo, 3-Series, and 3-Series Control System are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2013 Crestron Electronics, Inc.


Go Back