Close

Product

Model:QM-RMC

2016-12-12 03:45:29



OVERVIEW

larger systems. The QM-RMC provides a very cost-effective solution for controlling and monitoring any number of classroom video projectors, public display devices, centralized AV matrix routers, codecs, lighting systems, or remote motorized cameras over an IP network. Combining high performance and versatility at an affordable cost makes the QM-RMC ideal for mass deployment throughout college campuses, corporate meeting and training centers, and other multi-room facilities.
 
The QM-RMC is designed to mount inconspicuously at a projector, flat panel display, or any other device that requires control. The QM-RMC communicates securely and transparently via 10/100 Ethernet to any IP-enabled Crestron® touchpanel or control system. Crestron e-Control® 2 XPanel technology is fully supported as well allowing complete control from a computer or mobile device. Hundreds of AV devices and systems throughout a facility can be managed easily using Crestron RoomView® ProAV Help Desk Software, delivering the industry's best centralized control, monitoring and scheduling solution.
 
Two bi-directional RS-232 ports and one IR/Serial port are provided on the QM-RMC for full control of a wide array of AV devices. In addition, four digital input ports provide for direct connection to room occupancy sensors, power sensors, etc.
 
SPECIFICATIONS

Processor
  CPU 32-bit Freescale ColdFire® Microprocessor
Memory
  SDRAM 32 MB
  NVRAM 256 KB
  Flash 4 MB
Operating System
  Real-time, preemptive, multitasking kernel, multi-threaded; FAT32 file system with long names; supportsSIMPL Windows™SIMPL+®, SystemBuilder™, and D3 Pro™
Ethernet
  10/100 Mbps, auto-negotiating, full/half duplex, static IP or DHCP, SSL, TCP/IP, UDP/IP, CIP, SMTP, SNMP, Web server, SMTP e-mail client, supports all e-Control® 2 and RoomView™ applications
Connectors
  INPUT 1 – 4 (1) 5-pin 3.5mm detachable terminal block comprising (4) digital input ports;
Rated for 0-24 Volts DC, referenced to GND;
Input Impedance: 2k ohms pulled up to 5 Volts DC;
Logic Threshold: 2.5 Volts DC nominal
  IR (1) 2-pin 3.5mm detachable terminal block;
IR/Serial output port;
IR output up to 1.2 MHz;
1-way serial TTL/RS-232 (0-5 Volts) up to 115.2k baud;
Expandable via ST-SPL to control multiple disparate devices
  COM A – B (2) DB9 male, bidirectional RS-232 ports;
Up to 115.2k baud, hardware and software handshaking support;
Com port B also serves as the computer console port
  LAN (1) 8-wire RJ45 female;
10BaseT/100BaseTX Ethernet port
  12VDC 0.5A (1) 2.5mm barrel DC power jack;
12 Volt DC power input;
(PW-1205 power pack included)
Controls & Indicators
  LAN (2) LEDs, green indicates Ethernet link status, amber indicates Ethernet activity
  COM A – B (2) red LEDs, indicate activity on each corresponding COM port
  IR (1) red LED, indicates activity on the IR port
  INPUT (1) red LED, indicate activity on any digital input port
  HW-R (1) recessed pushbutton for hardware reset (reboots the control system)
  SW-R (1) recessed pushbutton for software reset (restarts the SIMPL program)
  PWR (1) green LED, indicates power supplied from power pack
  ACT (1) red LED, indicates activity on the LAN port
Power Requirements
  Power Pack 0.5 Amp @ 12 Volts DC;
120 Volts AC, 60 Hz power pack, model PW-1205, included
Environmental
  Temperature 41° to 113°F (5° to 45°C)
  Humidity 10% to 90% RH (non-condensing)
Enclosure
  Metal, black finish, freestanding (adhesive feet included)
Dimensions
  Height 1.43 in (37 mm)
  Width 4.65 in (119 mm)
  Depth 5.41 in (138 mm)
Weight
  1.34 lb (0.61 kg)
INTERNATIONAL VERSION (230 VAC)
  QMI-RMC
  All the features and specifications of the QM-RMC except:
  Power Requirements
  Power Pack 0.5 Amp @ 12 Volts DC;
230 Volts AC, 50 Hz power pack, model PWI-1215, included
Notes:
Crestron, Crestron RoomView, e-Control, RoomView, SIMPL Windows, SIMPL+, SystemBuilder, and D3 Pro are trademarks of Crestron Electronics, Inc. ColdFire is a registered trademark of Freescale Semiconductor, Inc. Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims proprietary interest in the marks and names of others.

Go Back