• Brightness: 16,000 ANSI lumens, 17,600 centre lumens
• Contrast: 1600-2000:1 full field | 650:1 ANSI
• Uniformity: 90% brightness uniformity

• Type: 3-chip 0.95” DMD  
• Native resolution: SXGA+ (1400 x 1050)
• Frame delay: As low as one frame

• Type: 2.4kW Xenon Bubble pre-aligned lamp module
• Life: 750 hours typical lamp life

Standard 

• Slot 1-2 populated, standard: two Dual Link DVI-D (330 MHz) input cards (each has VGA (165 MHz) for 3D or dual input 3D compatibility) with HDMI 1.3 receiver
• Slot 3-4 unpopulated

Optional  

• Analog
• Dual link DVI
• SD/HD-SDI
• Video Decoder
• Twin HDMI

Signals 

• HDTV formats VGA through to QXGA (2048 x 1536)
• Accepts all current 2D HDTV/DTV formats (optional input module may be required)
• HDMI 1.3 receiver supports mandatory HDMI 1.4a 3D modes of operation plus 24-144Hz triple flash 3D mode
• Multi-standard video decoder
• Horizontal and vertical scaling, all inputs

Pixel clock 

• 330MHz

Scan rates 

• Horizontal: 15-120kHz
• Vertical: 23.97-150Hz (frame lock maximum 120Hz)
• 48-60Hz frame doubled or dual input 3D
• 96-120Hz frame rate up to 1920 x 1200
• 24-144Hz triple flash 3D

• RS232 In/Out
• RS422 In
• Ethernet (10/100)
• GPIO (RS232 9 Pin male connector)
• Built-in, backlit LCD keypad
• Remote control (with optional wired XLR connection)

• Dust-sealed 3-chip DMD light engine
• Motorised horizontal and vertical lens offset
• Scheimpflug/Boresite (tilt) adjustment
• Built-in light shutter
• Tool-free lens insertion system

Fixed

• 0.73:1 SX+ ILS lens*
• 1.2:1 SX+ ILS lens

Zoom

• 1.25-1.6:1 SX+ ILS lens**
• 1.5-2.0:1 SX+ ILS lens
• 2.0-2.8:1 SX+ ILS lens
• 2.8-4.5:1 SX+ ILS lens
• 4.5-7.5:1 SX+ ILS lens
• 7.5-11.2:1 SX+ ILS lens

Offsets 

• +/- 100% Vertical
• +/- 50% Horizontal
• *0.73:1 +/-23%V   +/- 13%H
• ** 1.25-1.6:1 +/-70%V   +/- 45%H

Standard

• IR remote
• Power cord
• GPIO 3D sync card

Optional

• 2.4kW Xenon lamp bare bulb kit
• Bulb alignment tool
• ILS lens adapter kit
• CT lens mount
• Yellow notch filter
• Fog filters
• Remote IR sensor
• Active 3D glasses
• Active stereoscopic emitter
• DMX512 interface card
• Passive 3D glasses
• Passive stereoscopic modulator

• Embedded Christie Twist™  
• Intelligent Lens System (ILS™)
• Advanced block artifact reduction
• ChristieNET™ web interface
• User-friendly, intuitive LCD keypad
• Advanced Loop-Thru twin HDMI card
• Lamp memory module
• User replaceable lamps
• Advanced, 10-bit processing
• Automatic shut off
• Dust-sealed light engine
• SNMP (simple network management protocol)
• DHCP (dynamic host configuration protocol)
• Liquid cooling
• Setup lights
• Compatibility with many legacy accessories

• Operating voltage: 200-240V AC @ 50/60Hz
• Max current: 16A @200V
• Max power: 3200W
• Dissipation: 10,925 BTU/hr

• Dimensions: (LxWxH): 815 x 621 x 419mm (32 x 24.5 x 16.5")
• Shipping dimensions: (LxWxH): 1041 x 825 x 749mm (41 x 32.5 x 29.5")
• Weight: 72.5kg (160lbs) (without lens)
• Shipping weight: 91kg (200lbs)

• Temp: 5 – 40°C (40 – 104°F)
• Humidity: 20 – 80% noncondensing

• Directives (EC) 2002/95/EC (RoHS); 2002/96/EC (WEEE); Regulation (EC) No. 1907/2006 (REACH)
• CAN/CSA C22.2 No. 60950-1
• UL 60950-1
• IEC 60950-1
• FCC, Part 15, Subpart B, Class A
• EN55022/CISPR22 Class A
• EN55024/CISPR24
• Certifications marks (check with Christie for latest update): cULus (Canada & US), CE (EU), CCC (China), GoST-R (Russia), KC (Korea), PSE (Japan), C-Tick (Australia & New Zealand), South Africa